Fuel Inlet Kits

Carb Inlet Kits
Powerflow Carburetor Inlet Kits

 This group of inlet kits have a red/blue anodized finish.

 

PP-10401 Holley 4500 w/7/8-20 threads  -08AN inlet only
PP-10403 Holley 4160 w/5/8-18 threads  -06 & -08AN inlet
PP-10415 Holley 4150 w/7/8-20 threads  -06 & -08AN inlet
PP-10416 Demon w/9/16-24 threads  -06 & -08AN inlet

 


This group of inlet kits have a black anodized finish.

 

PP-10406 Holley 4150 w/7/8-20 threads  -06 & -08AN inlet
PP-10409 Demon w/9/16-24 threads  -06 & -08AN inlet
PP-10417 Holley 4150 w/7/8-20 threads  -08 inlet only*

 

*This version is widely used in racing applications where a -08AN connection is desired on both ends of the Inlet Kit. This new carburetor inlet kit incorporates a Powerflow Fuel Pressure Regulator which eliminates a lot of plumbing. All of the connections are straight threads with o-rings which is far superior to pipe thread connections. Inlet fitting on bottom of regulator easily swivels for front or rear fuel line entry.


This new carburetor inlet kit incorporates a Powerflow Fuel Pressure Regulator which eliminates a lot of plumbing. All of the connections are straight threads with o-rings which is far superior to pipe thread connections. Inlet fitting on bottom of regulator easily swivels for front or rear fuel line entry.

 

PP-10430 Holley 4150 w/7/8-20 threads  -06 inlet
PP-10431 Demon w/9/16-24 threads  -06 inlet

 


These inlet kits feature polished stainless tubing and a polished aluminum junction block with a 1/8-NPT gauge port.

 

PP-10421 Holley 4150 w/7/8-20 threads  3/8" hose nipple
PP-10420 Demon w/9/16-24 threads  3/8" hose nipple

 

The recent redesign of some of the Professional Products Carburetor Inlet Kits now provide for either a -06 or -08 inlet on the same kit. However if you want to connect a fuel hose to one of these Inlet Kits the following adapter will allow you to do so very easily and inexpensively.

This hex adapter has -08AN threads on one side and 3/8-NPT threads on the other.

 


PP-10450 This hex adapter has -08AN threads on one side and 3/8-NPT threads on the other.

Carburetor Extension

For the enthusiast who wants to make up their own inlet configuration. Coupler nut is -08AN.


 

This group of inlet kits come in a red/blue or black anodized finish.

PP-10410 Holley w/7/8-20  Red/Blue
PP-10412 Demon w/9/6-24  Red/Blue